Rupert Neve Designs Portico 5012V Duo Mic Preamplifier

-70% Off

$45,886.50

Rupert Neve Designs Portico 5012V Duo Mic Preamplifier

Add to wishlist
SKU: PRFIKVHWVW Category: Tags: , , , , , , ,

Description

The vertical Rupert Neve Designs 5012 Duo Mic Preamplifier is a dual-channel microphone pre-amplifier built with Rupert Neve’s custom input and output transformer circuits. The pre-amplifier is electronically balanced and designed to minimize the effects of hum, radio interference, and other dissonant noise from altering your sound. The vertical version of this module is a half-rack unit intended to be mounted in a small vertical rack or a bracket or tray that is itself mounted in a conventional 19″ horizontal rack.The microphone inputs use a transformer-like-amplifier chip and a toroidal Common Mode Rejection low-pass filter to reject frequencies above 150,000 Hz. This prevents odd high-frequency harmonics from altering the sound quality of your recording signal chain. After the high-frequency rejection stage, the pre-amp uses an input transformer that provides +25 dBu of input signal at unity gain without the need for a pad. The combination of an electronically balanced circuit with a true transformer amplifier stage allows the device to retain the Rupert Neve’s sound in a small form factor.The back panel of the device features an XLR input for channels A and B, an XLR output for each channel, and 4 x 1/4″ TRS connectors for connecting Portico bussing modules to the signal chain.

Rupert Neve Designs Portico 5012V Features:

  • SilkThe Silk knob on the front panel of the pre-amplifier reduces negative feedback and adjusts the frequency response of the signal to make the sound smoother and more pleasing
  • Level MeterEach channel in the pre-amplifier features an output-reference level meter ranging from -30 to 22 dBu
  • MuteThe Mute button cuts the output signal post metering and pre-buss output in the signal chain
  • High-Pass FilterThe pre-amp includes a High-Pass Filter that allows you to attenuate signals between 20 and 250 Hz. This is useful for removing motor hum, air, handling noise, and building rumble from the signal chain
  • Phantom PowerThe pre-amp can provide 48V of phantom power to each channel
  • Buss OutputFor connecting the pre-amp to other Portico Buss Amp/Monitoring modules, the pre-amp includes an unbalanced high-impedance Buss output. A TRS patch cord is used to connect the pre-amp to the other Portico unit
  • Phase ButtonThe pre-amplifier includes a Phase button that inverts the output polarity 180 degrees.

Rupert Neve Designs Portico 5012V Specifications:

  • Connectors

    2 x balanced XLR microphone connectors

    2 x balanced XLR connectors

    4 x 1/4″ TRS bussing module connectors

  • Frequency Response

    Main Output, no load

    -0.2 dB at 10 Hz

    -3 dB at 160,000 Hz

    Buss output measured at the 5014 monitor Buss-Mix Amplifier Output

    -0.2 dB at 10 Hz

    -3 dB at 160,000 Hz

  • Noise Measured at Main Output, unweighted, 22 to 22,000 Hz

    Terminated 150Ω

    With gain at unity: better than -100 dBu

    With gain at 66 dB: better than -62 dBu

    Equivalent Input Noise: better than -128 dBu

    Noise Factor: 1.5 dB

  • High-Pass Filter Continuously variable swept frequency from 20 to 250 Hz Slope: 12 dB/octave

  • Gain Unity to 66 dB in 6 dB steps

    Trim continuously adjustable from -6 to 6 dBBuss I/O Output is designed to feed the 5014 Monitor Buss mix amplifier at the internal system level of -2.5 dBu

    Output level of the 5014 is equal to that of the 5012

  • Maximum Output Level Maximum Output from 20 to 40,000 Hz: 25 dBu

  • Mute Mutes main output only

  • Total Harmonic Distortion/Noise At 1,000 Hz: 20 dBu output

    Main Output: better than 0.001%

    Buss Output measured at the 5014 monitor buss-mix amplifier output: better than 0.002%

    At 20 Hz, 20 dBu output

    Main Output: better than 0.002%

    Silk Engaged: better than 0.2% second harmonic

  • Crosstalk Measured channel to channel: better than -90 dB at 15,000 Hz

  • Phantom Power +48 VDC ±1%

  • Power Requirements Voltage range: 9 to 18 VDC

  • Current Consumption:

    At 9 VDC, current is 1.3 A typical: Power= 11.7W

    At 12 VDC, current is 1.0 A typical: Power= 12.0W

    At 15VDC, current is 0.8 A typical: Power= 12.0W

    At 18VDC, current is 0.65 A typical: Power= 11.7W

  • Dimensions (LxHxD)9 x 1.75 x 8.5″ (22.86 x 4.45 x 21.6 cm)

  • Weight 8 lb (3.6 kg)

Made in USA

Related products

Rupert Neve Designs Portico 5012V Duo Mic Preamplifier

$45,886.50